| |
This UPS
is specially designed for Personal computer with multi-functions.
Its light weight, compact design prefect fits to the limited
working environment. The line of UPS is equipped with boost
and buck AVR to stabilize input voltage range.
The main featured of UPS are listed below:
• Equipped with Boost and buck AVR to stabilize the
input voltage.
• DC Start Function.
• Auto restart while
AC recovery
• Compact size, Lightweight
•
Protection
Installation and operation
Installing the Login UPS is as easy as following
the steps shown. Be aware of the power switch must be kept
in the “ON” Position, otherwise, the UPS will
be disabled and your equipment will not be protected during
a power failure.
Inspection
Remove the Ups from its package and inspect it for
damage that may have occurred during shipping. If any damage
is, discover re-pack the unit and return it to place of
purchase.
Placement
Install the Ups nit in any protected environment
that provides adequate airflow around the unit, and is free
from excessive dust, corrosive fumes and conductive contaminants.
Do not operate your UPS in an environment where the ambient
temperature or humidity is high.
On the other hand, place the Ups unit away from the monitor
at least 20 cm to avoid interference.
Charging
This unite is shipped from the factory with its internal
battery fully charged, however, some charge may be lost
during shipping and the battery should be recharged prior
to use. Plug the unit into an appropriate power supply and
allow the Ups to charge fully leaving it plugged in for
at least 8 hours.
Computer connection
Connect one computer-related device into each the
power receptacles supplied on the back of the UPS.
Systems Description
Front Panel
• Power Switch
• LED Indicators:
AC Mode: Green Lighting
Charge Battery: Yellow Lighting
Battery Mode: Red flashing
Silence On : yellow lighting
|
